An iPhone that stays on the Apple logo after an iOS 27 update is usually still working through the install, stuck on a software fault, or too low on battery to finish starting. Which of these it is decides whether you should wait, restart it or reinstall iOS.
The steps below start with the ones that cost nothing and end with recovery mode on a Mac or Windows PC. If your iPhone is already on iOS 27, the recovery screen built into iOS 27 can also help.
A Moving Progress Bar Means the iPhone Is Still Working
After an iOS update, a restore from a backup or a transfer from an old iPhone, the Apple logo and a progress bar can stay on screen for more than an hour. Leave the iPhone connected to power until the progress bar has stopped moving for at least one hour.
If the logo stays for several minutes with no progress bar at all, move on to the force restart below.
Force Restarting an iPhone Uses a Different Button Sequence on Each Model
A force restart interrupts a frozen startup and tries again. Hold the last button until you see the Apple logo, which can take longer than 10 seconds.
iPhone 8 and Later
Every iPhone with Face ID, including the iPhone 18 Pro, uses the same sequence.
- Press and quickly release the Volume Up button.
- Press and quickly release the Volume Down button.
- Press and hold the Side button until you see the Apple logo.
iPhone 7 and iPhone 7 Plus
Press and hold the Volume Down and Side buttons together until you see the Apple logo.
iPhone 6s and Earlier
Press and hold the Home button and the Side or Top button together until you see the Apple logo.
If the iPhone reaches the Lock Screen afterward, no further steps are needed.
Charging an iPhone for an Hour Rules Out a Drained Battery
Plug the iPhone into a power adapter and charge it for one hour if it still does not turn on. If the screen shows a low-charge battery, charge it for 30 minutes or until it starts.
Try a different cable, adapter or outlet if nothing changes, then force restart the iPhone again.
Recovery Mode Reinstalls iOS When the Logo Stays Without a Progress Bar
Connect the iPhone to a Mac or Windows PC with a USB cable, then put it into recovery mode with the steps for your model. A Mac uses Finder, and a Windows PC uses the Apple Devices app.
On an iPhone 8 or later, the sequence looks like this.
- Press and quickly release the Volume Up button.
- Press and quickly release the Volume Down button.
- Press and hold the Side button, and keep holding it through the Apple logo until the recovery mode screen appears.
Your computer then offers Update or Restore. Choose Update first, since it reinstalls the latest iOS and keeps your data.
If the iPhone leaves the recovery screen while the download is still running, let the download finish and repeat the steps.
Apple Support Can Check for Hardware Damage When Nothing Works
If the iPhone returns to the Apple logo after an Update, or the problem started after a drop or liquid damage, contact Apple Support or visit an Apple Store or authorized service provider. A technician can check the display, battery and logic board for a hardware fault.
Restore erases the iPhone and installs a fresh copy of iOS, so keep it for the point where Update has failed.
1 comment