The iPhone 20 Pro camera sensor could have its logic circuitry built on a new 17nm process, according to a leak from China. The 17nm process applies only to the logic layer that reads out and processes the image, not to the pixels that capture light.
Weibo leaker Ice Universe posted the claim on November 13 for the main camera of the 20th anniversary iPhone, which is expected to launch in September 2027. The leaker did not say whether Apple designs the sensor itself or buys it from a supplier, and gave no pixel count or production date.
17nm Targets the Logic Layer
A stacked camera sensor keeps the light-sensitive pixels on one die and the circuitry that reads and processes the image data on another. A newer process for that lower die can allow faster readout, lower power use and more image processing on the sensor itself, before the data reaches the iPhone’s chip.
Apple’s own image sensor design already puts a logic die under the pixel layer to handle exposure control and noise reduction, according to a patent for it. The same design adds memory to each pixel so the sensor can record and subtract thermal noise as it captures.
A 17nm process would give the logic die more room for extra processing. No speed or efficiency figures came with the claim, so how much it would improve photos and video is unknown. The sensor would join other rumored changes for the phone, including a mostly glass curved body and 6.41-inch and 6.96-inch displays.
iPhone 20 Pro Camera Sensor Maker Unclear
Apple said in August 2025 that it is working with Samsung at its Austin, Texas fab on a new chipmaking technology that has not been used anywhere else. Reports since then have tied the Samsung partnership to camera sensors, and a three-layer stacked design is expected.
Apple is also rumored to be building its own sensor with LOFIC technology, which lets each pixel divert excess charge in bright scenes so highlights and shadows land in a single exposure. Prototypes reportedly reach 20 stops of dynamic range. The leaker did not link the 17nm logic layer to either project, so it could belong to a sensor from Samsung, Apple or another supplier.
Samsung introduced a 17nm FinFET process in October 2021 for image sensors, display driver chips and microcontrollers. Compared with a 28nm process, Samsung rates it at up to 43 percent less area, 39 percent higher performance or 49 percent better power efficiency, and it presents the three as alternatives.