| Product | Price | Discount | Why it is a great deal | Buy |
|---|---|---|---|---|
| $75.99$109.99 | 31% OFF | USB DAC and TRS3.5 inch carbon fiber woofers with Bluetooth 5.3. | Check on Amazon | |
| $109.99$149.99 | 27% OFF | Studio monitorsBluetooth 5.4, balanced TRS and a headphone output. | Check on Amazon | |
| $39.99$44.99 | 11% OFF | One USB-C cable2.25 inch drivers with Bluetooth 5.0 and a 3.5mm input. | Check on Amazon | |
| $170.99$189.99 | 10% OFF | USB DAC3 inch woofers, silk dome tweeters and a sub out port. | Check on Amazon | |
| $94.99$99.99 | 5% OFF | USB-C soundbarTwo full-range drivers, Bluetooth 5.0 and Chroma RGB. | Check on Amazon |
The M6 Mac mini Sends Audio to Speakers Over Bluetooth 6, USB-C or the Front Headphone Jack
Here is how speakers connect to the M6 Mac mini:
- Bluetooth 6: the Apple N1 chip pairs with wireless speakers without a cable
- USB-C: speakers with a USB-C plug or a built-in USB DAC connect to the front ports or any of the three Thunderbolt 4 ports on the back
- Headphone jack: the front 3.5mm jack drives any powered speaker with an AUX input
A speaker with only a USB-A plug needs a USB-C adapter.
The Creative Pebble V3 Runs Two 2.25 Inch Drivers From a Single USB-C Cable
The Creative Pebble V3 is a pair of 2.0 desktop speakers with 2.25 inch full-range drivers that deliver 8W RMS and up to 16W peak. A single USB-C cable carries power and audio, and Bluetooth 5.0 and a 3.5mm AUX input are built in. The drivers sit at a 45 degree angle toward your ears, and Clear Dialog processing sharpens spoken audio. A gain switch adds volume from a 10W USB port. Pick it if you want a small pair of speakers that connects with one cable.
The Kanto YU2 Has 3 Inch Composite Woofers and a Built-In USB DAC Rated at 50W RMS
The Kanto YU2 is a pair of powered speakers with 3 inch composite woofers, 3/4 inch silk dome tweeters and 50W RMS of total power. A built-in USB DAC gives a digital connection to a computer, and an AUX input takes the headphone jack. A sub out port adds a subwoofer later, a rear port tunes the bass and a volume knob on top doubles as the power switch. Pick it if you want a compact wired pair with a USB DAC.
The Kanto ORA Is a 100W Bi-Amplified Pair With a USB-C Input and a Subwoofer Crossover
The Kanto ORA is a pair of reference desktop speakers with 100W of DSP-tuned Class-D power, bi-amplified drivers and 3 inch woofers. It takes audio over USB-C, Bluetooth 5.0 or RCA, and a 100Hz automatic crossover starts when a subwoofer is connected. A 1/4 inch 20 threaded insert on the back of each speaker allows wall or ceiling mounting. Pick it if you want a USB-C input and enough power to double as studio monitors.
The Edifier MR3 Covers 52Hz to 40kHz With Bluetooth 5.4 and Balanced TRS Inputs
The Edifier MR3 is a pair of Hi-Res Audio certified studio monitors with 3.5 inch drivers, 1 inch tweeters and 18W RMS per speaker. The frequency response runs from 52Hz to 40kHz, and the peak output reaches 92.5dB. It has Bluetooth 5.4 with multipoint pairing, balanced TRS, RCA and AUX inputs and a headphone output. Music, Monitor and Custom modes are tuned in the Edifier ConneX app. Pick it if you want one pair of speakers for music, video editing and casual listening.
The Edifier MR4.5 Delivers 80W RMS Through 4.5 Inch Woofers With Bluetooth 6.0 and LDAC
The Edifier MR4.5 is a bi-amped pair with 4.5 inch mid-bass drivers, 1 inch silk dome tweeters and 80W RMS of total power. The response runs from 50Hz to 40kHz, and rear knobs adjust highs, lows and room placement. It connects over Bluetooth 6.0 with LDAC and multipoint pairing, or through XLR, TRS, RCA and AUX inputs, and a headphone jack sits on the front. A nine-band EQ lives in the ConneX app. Pick it if you want larger drivers and Bluetooth 6.0 to match the mini.
The Edifier R1700BT Pairs 66W RMS Bookshelf Speakers With a Remote and Side Panel EQ Knobs
The Edifier R1700BT is a pair of active near-field bookshelf speakers with 66W RMS of power in an MDF cabinet with a wood-effect finish. Bluetooth works with macOS, and a remote switches inputs, changes volume and puts the speakers in standby. Side panel knobs adjust the EQ. Pick it if you want a remote and bass and treble knobs within reach.
The Ortizan C7 Combines a 3.5 Inch Carbon Fiber Woofer With a USB DAC and Bluetooth 5.3
The Ortizan C7 is a pair of compact active monitors with 3.5 inch carbon fiber woofers and 0.75 inch silk dome tweeters. A 24-bit DAC takes audio over USB, and Bluetooth 5.3, RCA, a 6.35mm TRS balanced input and two AUX inputs cover the rest. A headphone output sits on the front panel. Pick it if you want a USB DAC and a balanced input in a compact monitor.
The Logitech Z407 Adds a Down-Firing Subwoofer and a Wireless Control Dial to 40W RMS
The Logitech Z407 is a 2.1 system with 40W RMS and 80W peak power, including a 20W ported subwoofer that fires downward. A wireless control dial with a 30 meter range handles play, pause, volume and bass. It connects to three devices over Bluetooth, USB or a 3.5mm input, and the satellite speakers stand vertically or lie flat. Pick it if you want a subwoofer and a dial that sits on the desk.
The Razer Leviathan V2 X Soundbar Draws Power and Audio Over USB-C and Lights 14 Zones
The Razer Leviathan V2 X is a PC soundbar with two full-range drivers and two passive radiators that reaches up to 90dB. A single USB-C cable carries power and audio, and Bluetooth 5.0 connects a phone. Chroma RGB runs 14 lighting zones, and the Razer Audio App changes the lighting and switches audio devices. It sits below a monitor. Pick it if you want a soundbar that fits under a display.
The Cyber Acoustics CA-2890 Clips Onto the Bottom of a Monitor and Includes a USB-A to USB-C Adapter
The Cyber Acoustics CA-2890 is a 10W USB speaker bar that clips onto monitors up to 1 inch thick. A single USB cable carries power and audio, and the adapter in the box converts the USB-A plug to USB-C. Buttons on the bar handle volume, mute and play or pause, and an LED shows status. It also stands on a desk and has a one-year warranty. Pick it if you want a clip-on bar with nothing else to set up.
My Pick Is the Edifier MR3 for Most Desks and the Creative Pebble V3 for a Single USB-C Cable
If I were buying speakers for the M6 Mac mini, I would get the Edifier MR3, because Bluetooth 5.4, a headphone output and balanced, RCA and AUX inputs all fit in one pair. The Creative Pebble V3 is the one I would put on a small desk, since it runs from a single USB-C cable. I would choose the Edifier MR4.5 for the larger drivers and the Bluetooth 6.0 connection that matches the mini.
Questions About Speakers for the M6 Mac mini
Do USB speakers work with the M6 Mac mini?
Yes. A speaker with a USB-C plug connects to any USB-C port, and a USB-A plug needs an adapter because the mini has no USB-A port. The Cyber Acoustics CA-2890 includes one.
Can the M6 Mac mini use Bluetooth speakers?
Yes. The Apple N1 chip supports Bluetooth 6, and the Edifier MR4.5 is built on Bluetooth 6.0 with LDAC.
Which port do speakers with a 3.5mm cable use?
The headphone jack on the front of the M6 Mac mini. The Kanto YU2 and the Edifier MR3 both have AUX inputs for that cable.
Which speakers for the M6 Mac mini come with a subwoofer?
The Logitech Z407 includes a 20W ported subwoofer. The Kanto YU2 has a sub out port, and the Kanto ORA has a 100Hz automatic crossover for a connected subwoofer.
Which speakers for the M6 Mac mini clip onto a monitor?
The Cyber Acoustics CA-2890 clips onto monitors up to 1 inch thick, and the Razer Leviathan V2 X soundbar sits below a monitor.
How loud are these speakers?
The Edifier MR3 reaches a peak output of 92.5dB, and the Razer Leviathan V2 X reaches up to 90dB.
Product prices and availability are accurate as of the date and time indicated and are subject to change.
As an Amazon Associate I earn from qualifying purchases.




