The best ESR deals on Amazon right now run from a 26 ft rated case to a 25W Qi2.2 charger with a cooling fan. Every one of the ESR iPhone 18 Pro cases below also fits the iPhone 17 Pro.
Choose a case by drop rating first, from 12 ft on the Classic Hybrid to 26 ft on the Cyber Tough With Flex Stand. Choose a charger by speed, since the Cyclone and the OmniLock reach 25W while the HaloLock stops at 15W.
Note: We earn a commission on qualifying Amazon purchases made through the links on this page.
Prices last checked Nov 3, 2:09 PM ET
The Ten Deepest ESR Deals on Amazon Right Now
| Product | Price | Discount | Why we picked it | Buy |
|---|---|---|---|---|
 ESR HaloLock 15W MagSafe Car Mount Charger | $19.99$29.99 | 33% OFF | 15W car chargerVent and dashboard mounting with 1,600 g of hold. | Check on Amazon |
 ESR Xtend 45W Retractable ChargerBlack | $35.99$49.99 | 28% OFF | Cable insideUp to 60W with AVS and a retractable 3.1 ft cable. | Check on Amazon |
 ESR MagSafe Wallet With 5 Card HolderBlack | $13.99$18.99 | 26% OFF | Five cardsRFID blocking with 3,200 g of hold with a magnetic case. | Check on Amazon |
 ESR Cyclone 25W MagSafe Charger | $36.99$49.99 | 26% OFF | Quiet coolingQi2.2 25W pad with a fan under 25 dB and a 0 to 150 degree stand. | Check on Amazon |
 ESR Atelier for iPhone 18 ProBlack | $29.99$36.99 | 19% OFF | Leather lookSilicone leather with a Flex Stand and 1,400 g magnets. | Check on Amazon |
 ESR MagSafe Car Mount With Two Metal RingsBlack | $15.99$18.99 | 16% OFF | No chargingA vent mount with 2,300 g of magnetic hold. | Check on Amazon |
 ESR Cyber Tough for iPhone 18 ProBlack | $16.99$19.99 | 15% OFF | 23 ft ratingThree layers with PORON foam and 1,500 g magnets. | Check on Amazon |
 ESR Cyber Tough for iPhone DuoBlack | $59.99$69.99 | 14% OFF | For iPhone DuoDual-layer case with full hinge protection and a camera kickstand. | Check on Amazon |
 ESR Classic Hybrid for iPhone 18 ProClear | $13.49$14.99 | 10% OFF | Slim and clearA 12 ft rated clear case with 1,500 g magnets. | Check on Amazon |
 ESR Cyber Tough With Flex Stand for iPhone 18 ProBlack | $29.99 | Current price | 26 ft ratingSGS-certified with a foldable stand and 1,500 g magnets. | Check on Amazon |
ESR’s Cases Range From a 12 ft Clear Shell to a 26 ft Rugged Case With a Stand
Every ESR case below has built-in magnets for MagSafe accessories. The iPhone 18 Pro cases also fit the iPhone 17 Pro, and the last case is made for the iPhone Duo.
ESR Cyber Tough With Flex Stand for iPhone 18 Pro
At 26 ft by SGS certification, the ESR Cyber Tough With Flex Stand has the highest drop rating among the 16 rugged iPhone 18 Pro cases. A foldable stand wraps around the camera module, MagSafe keeps working while it is open, and it folds flat over the lenses.
The shell has a rigid PC back, a TPE bumper and PORON foam, and the magnets hold up to 1,500 g. The Cyber Tough below drops the stand and is rated to 23 ft.
ESR Cyber Tough for iPhone 18 Pro
Without the stand, the ESR Cyber Tough is rated to 23 ft, with PORON foam inside the shell and Air Guard corners. Anti-slip textured sides and a dustproof charging port cover set it apart from the slim Classic Hybrid cases.
It carries the same 1,500 g magnet ring as the Flex Stand version, so MagSafe chargers, car mounts and wallets attach the same way. It is a three-layer case, and the Classic Hybrid below is the ultra-thin alternative.
ESR Classic Hybrid With Flex Stand for iPhone 18 Pro
SGS rates the ESR Classic Hybrid With Flex Stand to 16 ft, which ties the UAG Plyo for the highest drop rating among the 13 clear iPhone 18 Pro cases. The zinc alloy stand adjusts from 15 to 69 degrees and passed a 3,000-cycle test.
Magnets hold up to 1,500 g, and raised edges of 1.2 mm on the screen and 2.4 mm on the camera protect the glass. Camera lens protectors are not included.
ESR Classic Hybrid for iPhone 18 Pro
Slim is the point of the ESR Classic Hybrid, a clear case rated to 12 ft that meets a 3X military-grade standard and carries the same 1,500 g magnets as the ESR cases above. A Frosted Black version gives the back a matte finish.
It leaves out the stand, which is why its rating sits four feet below the Flex Stand version’s 16 ft. ESR calls the clear back anti-yellowing.
ESR Atelier for iPhone 18 Pro
Soft-touch silicone leather gives the ESR Atelier its look, and ESR says it resists stains better than PU leather. It carries the same Flex Stand as the Classic Hybrid, adjustable from 15 to 69 degrees.
SGS rates it to 12 ft, and the magnets hold 1,400 g, a little less than the 1,500 g on the other ESR iPhone 18 Pro cases here. Camera lens protectors are not included.
ESR Cyber Tough for iPhone Duo
Full hinge protection is what the ESR Cyber Tough for iPhone Duo adds, along with a dual-layer shell and a camera kickstand. It works with MagSafe and has an anti-slip grip.
ESR also makes a lens protector, a grip, a car mount and a 25W charger for the iPhone Duo, which are covered with this case in our ESR iPhone Duo cases roundup. Confirm the model before ordering, since this case is made for the iPhone Duo only.
ESR’s Chargers Include 25W Qi2.2 Models With Cooling and a 45W Wall Charger With a Built-In Cable
CryoBoost is ESR’s name for the fan cooling in the Cyclone, the 3-in-1 station and the OmniLock. ESR measured charging temperatures on the Cyclone up to 11.7°F lower than an official 25W MagSafe charger, and it competes with Apple, Anker and Belkin pads among the MagSafe chargers for iPhone 18 Pro.
ESR Cyclone 25W MagSafe Charger
A fan under 25 dB sets the ESR Cyclone apart from other single pads, and it is quiet enough for a nightstand. It charges at 25W over Qi2.2, and the stand tilts from 0 to 150 degrees for StandBy and video calls.
Magnets hold 1,200 g, or 2,000 g with an ESR magnetic case. A 5.9 ft cable is attached, and the charger needs a USB-C power source to reach 25W.
ESR 3-in-1 Charging Station With CryoBoost
Three devices charge at once on the ESR 3-in-1 Charging Station, the most complete of the 3-in-1 charging stations. It pairs a Qi2.2 25W stand for the iPhone with a certified watch charger that ESR says takes an Apple Watch Series 10 from 0 to 80% in 30 minutes.
It folds to 4.33 by 2.44 by 0.62 inches and has a fan-off mode for the nightstand. A 50W GaN charger is in the box, and the stand holds the iPhone with 1,200 g of magnetic force.
ESR Xtend 45W Retractable Charger
The cable lives inside the ESR Xtend 45W, a 3.1 ft braided USB-C cable tested for more than 20,000 pull-and-retract cycles. It supports PD 3.2 AVS for up to 60W, and ESR says it takes an iPhone 18 Pro to 50% in 15 minutes.
The second USB-C port needs a separate cable to charge two devices at once. The body measures 64 by 53 by 29 mm, and Apple’s 40W Dynamic Power Adapter is the phone-only alternative among the 60W chargers for iPhone 18 Pro Max.
ESR OmniLock Qi2.2 25W Car Mount Charger
Qi2.2 certification puts the ESR OmniLock at 25W in the car, with CryoBoost cooling and an arm that rotates 360 degrees. A 58W dual-port car adapter and a 1 m USB-C cable are in the box.
The vent hook fits blades 10 to 32 mm wide and does not fit blade-less, round or hidden vents. 25W charging applies to the iPhone 18 Pro, iPhone 18 Pro Max and iPhone 17 series, while the iPhone 15 through iPhone 12 charge at 15W.
ESR HaloLock 15W MagSafe Car Mount Charger
The ESR HaloLock 15W works on a vent or a dashboard and holds the phone with 1,600 g of magnetic force. It stops at 15W, against 25W for the OmniLock above.
A dashboard anchor comes in the box, and the car adapter does not. 15W is also the speed for the iPhone 15 through iPhone 12, so the HaloLock matches their top charging rate.
ESR MagSafe Car Mount With Two Metal Rings
Magnet strength sets the ESR MagSafe Car Mount apart, with N52H magnets that hold 2,300 g, more than the 1,600 g on the HaloLock above. It hooks onto horizontal, vertical, circular and cross-hatch vents.
Charging is not supported, so the phone needs a cable in the car. Two metal rings come in the box for phones or cases without magnets, and the mount is one of the eight MagSafe car mounts for iPhone 18 Pro.
ESR’s Magnetic Grip and Wallet Add a Stand and Five Card Slots to the Back of an iPhone
ESR says to take its grip off before wireless charging, and Lamicall gives the same instruction for its Magnetic Phone Grip, one of the 13 MagSafe grips for iPhone 18 Pro.
ESR Phone Grip and Stand
A 0.9 inch TPE-lined ring and a dual-joint stand for portrait or landscape viewing make up the ESR Phone Grip and Stand. Its zinc alloy hinges were tested for more than 5,000 uses.
Magnets hold 1,200 g on a bare phone or a MagSafe case. Two metal rings come in the box for a second phone or a case without magnets.
ESR MagSafe Wallet With 5 Card Holder
Five cards, or four cards and three banknotes, fit in the ESR MagSafe Wallet behind RFID blocking. Twenty N52 magnets deliver 3,200 g of holding force with a magnetic case.
A 20 mm slot at the bottom lets you slide cards out with a thumb. It does not fit the iPhone 13 mini or iPhone 12 mini, and Find My models such as the MOFT MagSafe Wallet Stand are among the MagSafe wallets for iPhone 18 Pro.
ESR’s iPad mini Accessories Fit Only the 8.5 Inch OLED Model
Both ESR iPad mini products below are made for the 8.5 inch OLED iPad mini and do not fit earlier generations. The ESR AirStance and Boost Kickstand cases offer other stand layouts among the OLED iPad mini cases.
ESR Rebound Series Trifold Case for iPad mini
Folding into a two-way stand is what the ESR Rebound Series trifold cover does. A recessed groove charges the Apple Pencil Pro, and a magnetic clasp holds the Pencil in place.
Magnets attach the case to the iPad mini and make it easy to take off. Apple Pencil (USB-C) is supported as well.
ESR Armorite Screen Protector for iPad mini
Two protectors come in the ESR Armorite pack, cut from 0.33 mm high-alumina 9H glass that ESR says withstands 110 lb of pressure. An UltraFit tray aligns the glass and removes dust during installation.
A camera cutout and full Apple Pencil support are included. Clear glass keeps text sharper than the matte ESR Paper-Feel, which is the better choice for drawing among the OLED iPad mini screen protectors.
ESR backs these accessories with a 12-month protection plan and lifetime customer support.
Newsletter
Never miss an Apple story
One email a day, the news that matters. No spam, unsubscribe anytime.
You're subscribed
We sent a confirmation to your inbox — check spam if you don't see it.
Product prices and availability are accurate as of the date and time indicated and are subject to change.
As an Amazon Associate I earn from qualifying purchases.
